How to Login to the Router

关键词:
问题描述

How to Login to the Router

 

1 Setting Up Configuration Environment

The Quidway series routers can be configured only by the Console port during the initial installation.

2 Connecting Cables

Step 1: Connect the DB-9 (or DB-25) connector of the configuration cable to the serial port of the PC or terminal where the router is to be configured.

Step 2: Connect the RJ-45 connector of the configuration cable to the Console port of the router.

3 Setting Parameters for the PC or Terminal

Step 1: Power on the PC or terminal.

To configure with the PC, you need to run the terminal emulation program, such as the Windows HyperTerminal, on the PC.

Step 2: Set the terminal parameters.

Parameter requirements:

Set the baud rate to 9600, data bit to 8, no parity check, stop bit to 1, no flow control, and terminal emulation to VT100.

Set parameters for the Windows98 HyperTerminal as follows:

(1)      Click the Attribute button in the following HyperTerminal window.

 

(2)      Choose the serial port to be connected from Used when Connecting in the HyperTerminal attribute dialog box, make sure that it is the one connected with the configuration cable, and then click Configure.

 

(3)      Set the baud rate to 9600, data bit to 8, no parity check, stop bit to 1 and then click OK.

(4)      Select the Settings tab in the following dialog box, set terminal emulation to VT100, and then click OK.no flow control as shown in the following dialog box, and then click OK.

1.2.4 Powering On the Router

Make sure that the router is correctly connected to the configuration terminal, and then power on the router after setting the terminal parameters. You will see the self-test information.

The system starts up as follows:

 Starting at 0x1c00000...

 

      ********************************************

      *                                           *

      *  Quidway Series Routers Boot ROM, V9.07   *

      *                                           *

      ********************************************

 

  Copyright(C) 1997-2004 by HUAWEI TECH CO., LTD.

  Compiled at 18:10:29 , Oct 14 2004.

 

   Testing memory...OK!

   128M    bytes  SDRAM

   32768k  bytes  flash memory

   Hardware Version is MTR 1.0

   CPLD Version is CPLD 1.0

 

  Press Ctrl-B to enter Boot Menu

The current starting file is main application file--flash:/340-0106.bin!

 

The main application file is self-decompressing...............................................................................................................................................................................................................................................OK! 

  System is starting...

  Starting at 0x10000... 

  User interface Con 0 is available.

  Press ENTER to get started.

<Quidway>

Press Enter, and proceed with the next configuration when seeing the prompt <H3C>.

 

 

[Tip]

The preceding operations apply to all network equipment of H3C.

案例信息

案例类型:FAQ
案例号:KMS - 12562
创建时间:2007年9月17日
更新时间:2007年9月30日
发布时间:2007/9/30 3:40:03
文章密级:游客可见
有效期:长期有效
发布者:纪合宝【技术大咖】 [j03195]
点击次数:445
评论平均得分:0
关键词:
产品线:中低端路由器
产品系列:
产品版本:

常用操作
收藏