I First found in version
II The version(s) already found this problem
III Description of the problem
An iNode client is connected to a port, on which port-based dot1x function is enabled. When iNode client is authenticated successfully, the policy server tries to apply some isolation ACL rules to the device, namely:
acl number 3000
rule 0 deny ip
rule 5 permit udp destination-port eq bootps
rule 6 permit udp destination-port eq bootpc
The iNode client passes authentication, but it can‘t get a dynamic IP address.
Update to version S3600EI-CMW310-R1510P21.